HOT WATER SYSTEM STOPPED UNEXPECTEDLY? HERE'S HOW TO DO NEXT

Hot Water System Stopped Unexpectedly? Here's How to Do Next

Hot Water System Stopped Unexpectedly? Here's How to Do Next

Blog Article

Call Today

How do you actually feel about Hot Water Heater Repair?


How to Troubleshoot and Repair an Electric Water Heater
Several modern residences utilize an electrical water heater for their heating system, as a result of its benefit and also ease of use. Nevertheless, just like any other electric home appliances, troubles might develop with its usage, suddenly. It can be really discouraging to awaken to a cool shower as opposed to a hot one or having your bath with water that isn't warm sufficient and even too hot. Whatever the case may be, water heater troubles can be rather nerve-racking. The good news is, we've made a listing of feasible solutions to your hot water heater concerns. There are a number of elements that might create a lot of these problems, it could be a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you shut off the main power supply for safety and security. Whatever the problem is, getting it dealt with ought to not pose way too much of an issue if you adhere to these steps:

Examine Your Power Supply:


As standard as this may seem, it is very needed. Without ample power, your hot water heater will not work. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power issue. Inspect if the fuse is burnt out or the breaker stumbled. If the breaker is the problem, merely turn it off and on again. Replace any type of damaged or worn-out fuse. Check the home appliance with power after these modifications to see if it's now functioning.

Inspect the Heating Element in the Hot Water Heater:


If it's not a power issue, then attempt looking into your burner if it is still working. Check each of your heating elements to make sure the problem isn't with any of them. If any one of them is malfunctioning, change that part and after that inspect whether the hot water is back on.

Inspect Your Thermostat:


If your hot water heater still isn't functioning or the water appearing isn't warm sufficient, you may require to inspect the temperature setups on your top thermostat. Ensure the breaker is switched off before doing anything. Open the gain access to panel and also press the red button for temperature level reset above the thermostat. This need to assist heat the water. Transform the circuit breaker back on and examine if the problem has actually been dealt with.

Call A Specialist:


If after changing all faulty parts and resetting your temperature, the water heater still isn't functioning, you might require to call a professional plumber for a specialist viewpoint. The problem with your heating unit could be that the hot and cold taps have actually been changed or it might be undersized for the amount of hot water needed in your home. Whatever the instance may be, a professional plumber would certainly help solve the trouble.

Final thought


Water heater problems are not constantly significant. A lot of them result from small concerns like a blown fuse or worn-out heating element. Changing the malfunctioning components must work. Nevertheless, if you are still not able to resolve the trouble, give a call to your local plumber to find to get it dealt with.

What To Do If Your Hot Water Suddenly Stops Working


The water heater tripped the circuit breaker


The occasional power surge can sometimes cause your large appliances to trip their circuit breaker. Head to your electrical panel to see if the switch associated with your water heater needs to be reset


Your water heater’s fuel supply has been shut off.


If you own a gas or propane water heater, someone might have closed the gas valve. Without gas, your water heater can’t heat water. Ensure the valve is in the “open” position (parallel to the gas line, as opposed to perpendicular to it). If you smell gas (a “rotten egg” smell) or hear the hissing sound of a gas leak, evacuate your home at once, notify your utility company from a safe distance away, and contact a professional to repair your gas line.


The water heater’s pilot light is out.


Although newer water heaters no longer have pilot lights, it’s commonplace for older gas water heaters to have them. Typically, you can find instructions for relighting the pilot light somewhere on the side of the water heater tank, in the owner’s manual, or in online instructions from the manufacturer. Of course, you can always consult a qualified plumber regarding water heater pilot light issues as well.


There’s a problem with the water heater’s burner.


  • Wait for the burner to turn off. If you have no hot water, it’s probably off already. Once it’s off, set your water heater’s thermostat to 120°F.


  • Go to a faucet and turn on the hot water. Let it continue to run for a minute or so while you check on the burner.


  • Observe to see if the burner ignites. If it does, you can adjust the temperature as needed while the water still runs. However, the Consumer Product Safety Commission (CPSC) strongly recommends a temperature no higher than 120°F to prevent scalding.


  • If your burner does not ignite, there’s most likely a problem with the thermostat. You’ll need a plumbing professional to repair it.


  • The water heater’s capacity is too small.


    If you own a storage tank water heater, sometimes a couple of showers in a row can use up most of the hot water stored in the tank. Then, when it’s time for the next person to shower, they’ll run out of stored hot water partway through and then they'll experience water not getting hot. You have some options:


  • Wait longer before showering so the hot water can “fill up” again.


  • Upgrade to a water heater with a bigger tank.


  • Switch to an on-demand (or tankless) water heater.


  • Do You Have a Faulty Heating Element?


    Hot water is heated by one or more heating elements that are located at the bottom of the hot water heater. Due to sediment cover, these elements become less effective at heating water. Even without sediment buildup, heating elements can become damaged and inefficient after years of regular use.



    In the event that the hot water heater's heating element fails, the water will be lukewarm throughout the home. You can restore hot water to your home by contacting a plumber or hot water heater technician.

    https://www.albrightsmechanical.com/blog/2021/january/what-to-do-if-your-hot-water-suddenly-stops-work/


    What Would Cause My Electric Water Heater to Stop Working?

    We were introduced to that article about Hot Water Heater Repair through an acquaintance on a different web property. Enjoyed our blog entry? Please share it. Let someone else locate it. Thanks for taking the time to read it.


    Resolve today, call!

    Report this page